Häufig gestellte Frage

We strongly recommend you reset all router settings before starting the installation

1. Be aware of your Teltonika device model name and firmware version. This information is necessary to download the matching version of the Bondix client.

1.1 The device model name can be found on the original packaging or on the device itself (e.g., RUTX12, RUT955, etc.).

1.2 The firmware version is displayed after logging into the WebUI of your device via a web browser.

After you connect to the router via WAN/LAN or Wi-Fi, the default IP address for device access should be http://192.168.1.1 or http://192.168.2.1, unless changed by the user.

*Default credentials:

• Username: admin
• Password: admin01 *Unless stated differently on the sticker of the device itself.

2. Download the Bondix client matching your model and firmware version from here:

https://wiki.bondix.dev/wiki/Downloads#Teltonika_Routers

(If you do not find a version that matches your firmware, please update your firmware to the latest version available on our website. This can be found on the Teltonika wiki for your device model, e.g., https://wiki.teltonika-networks.com/view/RUTX12_Firmware_Downloads).

3. Enable advanced settings in your device WebUI, as this will be needed for the installation.

4. Go to System -> Package Manager -> Upload. This will be the location to upload the Bondix client installation package.

4.1 Select "Browse", find, and upload the Bondix package downloaded previously.

4.2 There will be a package verification popup dialog telling you the Bondix S.A.NE Client is an unauthorized package. Click on “Proceed” to continue with the installation.

5. Reboot your device from the popup button after successful installation, or from the top menu.

6. If the Bondix S.A.NE Client was installed correctly, you’ll find a new menu item “Bondix®” in the “Network” section of your Teltonika router.